Micron Boise Mega-Fab

A public-record-scale ID1 construction verification study. The building massing follows disclosed permit dimensions; the UAV mission, point cloud, model geometry and QA results are explicitly simulated.

4.85M ft²Total floor area

1.2M ft²First floor

600k ft²Cleanroom

160 ftPublic height

LiDAR Capture

Edge Ingest

AI Segment

Model Register

Δ Analysis

ACC Review

H hide UI · C site overview · I evidence / assumptions · Single HTML

Real delivery path · simulated telemetry only

DEMO · Terra / ACC / Navisworks workflow 00:00:00

Simulated stream rate

0.0 Mbps

Simulated processing

0 ms

Demo classifier F1

Demo model residual

0 mm

L2 reference · simulated capture estimate 0 pts/s INIT —

Illustrative mission geometry · not a flight plan 0.00 m —

Illustrative density estimate · not a deliverable — —

Demo residual · tolerances require project approval 0.00 mm WITHIN TOL

Illustrative model comparison · not as-built verification

Study IFC LAZ scan ML class Coverage Δ>75mm

4D envelope animation · simulated 0.0%

—

Illustrative model zone —

Simulated coverage / line 0.0% —

How this is implemented for real

Authorize: site owner/EHS approval, Part 107 remote pilot, aircraft registration and Remote ID; obtain any required airspace authorization.
Capture: use an approved flight plan, RTK FIX, IMU calibration, surveyed control and independent checkpoints.
Process: preserve raw sensor logs and process an L2 point cloud in DJI Terra; register it to the approved project control system.
Govern: compare to the federated model against project-approved tolerances, then assign and close exceptions through the project issue workflow.